iOptron iPolar Electronics Polarscope for SkyGuider Pro

Introducing iOptron iPolar^TM - a high precision, easy to use electronics polarscope (e-PS).

What makes iPolar unique?
1. Can be easily installed inside the RA shaft on all iOptron equatorial mounts (except SmartEQ Pro).
2. Can be used on any mounts with adapters either internally or externally.
3. USB plug and play (no driver needed)
4. Works globally, no need to set northern and southern hemisphere.
5. No visible Polaris (north) or Sigma Octantis (south) necessary.
6. No need to rotate the mount during polar align.

iPolar is a smart electronic polarscope for everyone.

ตัวแปลง GSO 2" มีเกลียว T อยู่ด้านใน (สำหรับแปลง T-Adapter ของกล้องดูดาวให้กลายเป็น eyepiece holder ขนาด 2")

• แปลง T-Adapter ของกล้องดูดาวให้กลายเป็น eyepiece holder ขนาด 2" เพื่อต่ออุปกรณ์เช่น eyepieces, diagonal ตามความเหมาะสม
• ปลายที่ต่อกับกล้องมีเกลีบวที (T-thread) เพื่อต่อกับ T-Adapter
• อีกปลายนึงเป็น eyepiece holder ขนาด 2" ที่มี compression ring แบบทิงเหลืองเพื่อป้องกันอุปกรณ์เป็นรอย
• ผลิตจากอลูมิเนียมคุณภาพสูง แข็งแรงทนทาน
• สินค้าคุณภาพสูง ผลิตในไต้หวัน

AZ base for converting iEQ45 from EQ to AZ. Requires pier or tripod (not included) 

For a early version iEQ45 with 8406 hand controller, a hand controller and control boards upgrade are needed. Please contact iOptron directly for more information. Please also make a note when ordering if the mount is not an 8000D model. Some extra parts and DIY instruction will be supplied.

Top loading carry bag. Perfect for carrying 2" tripod for CEM60/CEM60EC, iEQ45/iEQ45 Pro, iEQ30/iEQ30 Pro, MiniTower/MiniTower Pro* and CEM25/ZEQ25 mount. Will hold other tripods also (see dimensions). 

Durable padded fabric with two adjustable shoulder straps and a waist buckle strap.

* Does not fit 2" MiniTower Pro tripod with triangle mounting plate.

Custom fitting hard case for CEM40

Askar M54 M48 T-Ring for Nikon Z-Mount Mirrorless Cameras

Sky-Watcher 8.4" Pier Extension for EQ6 / EQ6-R / AZ-EQ6

Works on EQ6 and EQ6-R mounts. Raises the mount head 8.4”. Especially useful for owners of long-tube refractor telescopes because it positions the eyepiece at a more comfortable height and prevents the telescope from hitting a tripod leg. 

FF80APO 0.76X Full Frame Reducer

ZWO has released a new 3-inch FF80APO 0.76X full frame reducer with a three-element optical design, including one element made of ED glass. Its reduction factor is 0.76x, which gives the FF80APO f/7.5 astrograph a shortened focal ratio of f/5.7 and a shorter focal length of 312mm. This allows for less total integration time and a wider field of view, bringing more convenience and possibilities for your wide-field deep sky imaging.

The reducer has a rear interface that attaches to the FF80APO telescope tube’s included four-segment camera extension tube. The back focus is the standard 55mm, and it has a built-in M48X0.75 2-inch filter thread for easy attachment.

เมาท์ตามดาว Sky-Watcher Wave 150i Strainwave Mount

• Wave 150i GoTo strainwave head
• Works seamlessly with ASI Air (USB-B cable included)
• EQ and AZ modes
• Built-in cable management
• Weighs 12.8 pounds (5.8kg)
• 33-pound (15kg) payload capacity without optional counterweight
• 55-pound (25kg) payload capacity with optional counterweight
• Single D/V hybrid saddle
• Latitude range from 0° to 90°
• Red LED for latitude scale and bubble level
• Wi-Fi and Bluetooth
• RA power off braking function
• RA and DEC home position functions
• Requires 12V 2A power (not included)
• Optional tripod, pier extension, and counterweight kit not included
• Optical Tube not included

Sky-Watcher Dovetail Mounting Plate, Long 33.5cm

Compatible with most Sky-Watcher mounts and drilled to accept Sky-Watcher tube rings.

Also suitable for Celestron, Vixen, Orion and other mounts with Vixen-type saddles.