Antlia Telescope Adapter: T-2INCH

Antlia Telescope Adapter: T-2INCH

แบ่งปันสิ้นค้าชิ้นนี้

รายละเอียด

คะแนนสินค้า
SKU
AN-T-2INCH
ผู้ผลิต
จำนวนในสต๊อก
เหลือ 2 ชิ้น
น้ำหนัก
100.00 g
ราคาของเรา
฿690.00

ตัวเลือก

จำนวน (เหลือ 2 ชิ้น)

(จาก 1 ถึง 2)


  • รายละเอียด

  • สินค้าแนะนำ

  • รีวิว

  • ความคิดเห็น

  • ส่งให้เพื่อน

Antlia Telescope Adapter: T-2INCH

- Can be used with Antlia's Filter Drawer System (see below)
- Telescope-sided adapter for 2" Male thread
- Optical height: 0.5mm
- Weight: 50g

T-2INCH

 

The filter drawer system is a very convenient and inexpensive alternative to the filter wheel for simple changing of filters and connection of camera and telescope.

Antlia drawer system is composed of three parts, mainbody base with an optical depth of 20mm, telescope adapter and camera adapter, three parts are connected and fixed by screws. All parts of the Antlia filter drawer system are made of aviation aluminum CNN.

Due to optical depth of 20mm, it can be used also with scopes with a high focal ratio.

In the drawer system, the mainbody are abbreviated with (B) for base, the adapters are abbreviated with (T) for telescope side and (C) for camera side.

 

Antlia filter drawer layout

 

For the Filter Base, two specifications of filter sliders are provided. Double strong magnets create stronger adsorption and easier installing:

- 2inch M48*0.75 thread can be used with the 2'' mounted filters. (B-2INCH)

- D50mm thread can be used with the round 50mm unmounted filters. (B-50)

 

Three filter holders allow you to use the filter with a smaller filter thread size. No need to buy another set of filter drawer

or slider when you buy new cameras or telescopes.

B-4836 filter holder mounted into B-2INCH slider can help you directly fit the 36mm unmounted filter onto 2” filter drawer.

B-4831 filter holder mounted into B-2INCH slider can help you directly fit the 31mm unmounted filter onto 2” filter drawer.

B-48125 filter holder mounted into B-2INCH slider can help you directly fit the 1.25'' mounted filter onto 2” filter drawer.

 

 Connection of filter drawer,slider and adaper

 

 

The main body of the filter drawer system is available with a wide range of threads.

The mainbody base drawing

The screws are used to connect base and adapters. Four pieces of Hexagon  socket  screws  are  equipped  and  also installation tools are provided. The system is  designed in a such convenient way,  that it is possible to mount all popular equipments found on the world. You can also adjust the position of the camera and telescope very well.

DSC_3198

 

  • กล้องเล็งหาดาว TELRAD Telescope Reflex Sight พร้อมฐานติดตั้ง

    กล้องเล็งหาดาว TELRAD Telescope Reflex Sight พร้อมฐานติดตั้ง

    กล้องเล็งหาดาว TELRAD Telescope Reflex Sight พร้อมฐานติดตั้ง

    • อุปกรณ์ที่ช่วยให้การส่องหาดาวที่เราต้องการทำได้ง่ายดายยิ่งขึ้น
    • ไม่เหมือนกล้องเล็งหาดาวทั่วไปที่มักให้ภาพขยายที่ตีลังกา Telrad ให้ภาพที่ปกติทำให้การเคลื่อนกล้องเข้าสู่บรอเวณท้องฟ้าทำได้สะดวก
    • แสงวงแหวน 3 วงใช้สีแดง ปรับความสว่างได้ เพื่อป้องกันการรบกวนการปรับสภาพตา วงเล็กสุดมีขนาดเท่ามุมของดวงจันทร์ (0.5 องศาเท่านั้น) จึงให้ความแม่นยำเพียงพอสำหรับการใช้งานทุกรูปแบบ
    • ใช้ได้กับกล้องทุกรุ่นที่มีพื้นที่ติดตั้ง และรองรับน้ำหนักได้ (ความยาว 8" น้ำหนัก 11 ออนซ์)
    • ติดตั้งง่าย ไม่จำเป็นต้องเจาะรูเพิ่ม
    • ใช้แบต AA 2 ก้อน
    ฿2,690.00
  • GSO 4mm Super Plössl eyepiece สำหรับกล้องดูดาวขนาดฟอกัสเซอร์ 1.25"ทุกรุ่น

    GSO 4mm Super Plössl eyepiece สำหรับกล้องดูดาวขนาดฟอกัสเซอร์ 1.25"ทุกรุ่น

    GSO 4mm Super Plössl eyepiece สำหรับกล้องดูดาวขนาดฟอกัสเซอร์ 1.25"ทุกรุ่น

    • Eyepiece เคลือบแบบหลายชั้นทุกพื้นผิวที่สัมผัสกับอากาศ (Fully multi-coated eyepieces) เพื่อปกป้องเลนส์กระจกและการส่งผ่านแสงที่ดีขึ้น
    • ใช้งานได้กับกล้องดูดาวที่มีขนาด focusor 1.25" มาตรฐานทุกรุ่น
    • เลนส์คุณภาพสูง ให้ภาพคมชัดคลอดทั้งบริเวณกลางและขอบภาพ
    • การออกแบบลักษณะ Premium Plossl เลนส์ 4 element, พร้อมเคลือยขอบเลนส์ให้ดำเพื่อลดแสงสะท้อน
    • Eye Relief 6mm, ให้ความกว้าง Field of View 52 °
    • มีร่องบน barrel สำหรับการยึดโดย thumb screw ที่แน่น ป้องกัน eyepiece หลุดออกจาก กล้องดูดาว
    • มีเกลียรวรองรับฟิลเตอร์ขนาด 1.25" มาตรฐาน, มีขอบยางกันแสงรบกวนที่สามารถพับขึ้นลงได้
    • น้ำหนัก 74g, รวมฝากันฝุ่น 2 ด้าน, ผลิตในประเทศไต้หวัน
    • รวมประกัน 1 ปีเต็ม
    ฿999.00
  • *PREORDER* หัวเมาท์กล้องดูดาวระบบคอมพิวเตอร์ iOptron AZ Mount Pro (ไม่รวมขาตั้ง)

    *PREORDER* หัวเมาท์กล้องดูดาวระบบคอมพิวเตอร์ iOptron AZ Mount Pro (ไม่รวมขาตั้ง)

    หัวเมาท์กล้องดูดาวระบบคอมพิวเตอร์ iOptron AZ Mount Pro 8900 (ไม่รวมขาตั้ง)

    • เมาท์กล้องอัฉริยะ! มีระบบเข็มทิศ (compass) และเซ็นเซอร์ก้มเงย (angular sensor) และ GPS ในตัว จึงเข้าสู่ตำแน่งเริ่มต้น (alignment) โดยอัตโนมัติและหาดาวดวงแรกให้เราภายใน 3 นาที โดยไม่ต้องตั้งค่าอะไรเลย! (ดูคลิปด้านล่าง)
    • แบตลิเธียมในตัว เพื่อใช้งานต่อเนื่อง 10 ชม
    • เมาท์รองรับน้ำหนักกล้องหลักได้ 33 ปอนด์ (15kg) และรับน้ำหนักกล้องรองได้อีก 10 ปอนด์ (4.5kg) โดยที่เมาท์หนักเพียง 13 ปอนด์
    • 128x microstep stepper motor แบบประหยัดพลังงาน ทำงานเสียงเบากว่าสัญญาณแป้นกดควบคุม (ดูคลิปด้านล่าง)
    • ใช้เพืองตัวหนอน (worm gear) ที่ทำด้วยโลหะ ทนทานแข็งแรง รองรับกล้อง 2 ตัว หาดาวแม่นยำขึ้น (ระดับ 0.1 arc second)
    • ระบบคอมพิวเตอร์ Go2Nova® 8407 hand controller พร้อมฐานข้อมูลดาว 212,000+ ดวง และกำหนดวัตถุเพิ่มได้เองอีก 60 วัตถุ
    • หน้าจอ LCD ขนาดใหญ่ รองรับ 8 บรรทัด กว้าง 21 ตัวอักษรต่อบรรทัด พร้อมปุ่มที่มีไฟส่องสว่างเพื่อใช้งานในที่มืด
    • Zero backlash driver system
    • รองรับการควบคุมผ่าน WiFi แบบไร้สายผ่าน app ต่างๆ บน Android/iOS/PC/MacOS เพิ่มความสนุกและมิติในการเรียนรู้
    • มี Built-in WIFI adapter สำหรับ full ASCOM, iOptron CommanderTM และ Sky Safari wireless control
    • มีช่อง Serial port สำหรับทำ firmware upgrade และควบคุมกล้องด้วยคอมพิวเตอร์ ผ่านสาย serial cable
    • แกน counter weight ที่เก็บเข้าไปในตัวเมาท์ เพื่อความเป็นระเบียบ ไม่สูญหาย
    • หน่วยความจำเก็บค่าตำแหน่งสุดท้ายก่อนไฟดับ
    • บอดดี้ทำด้วยอลูมิเนียมแบบ die-cast ดูทันสมัย เบา แข็งแรงทนทาน
    • จุดยึดกล้องกว้าง 6" รองรับกล้องดูดาวมาตรฐานทั่วไป ทั้ง Losmandy/Vixen styles (ซึ่งแพร่หลายที่สุดในตลาด)
    • มีระบบ GPS รองรับ 32 ช่องสัญญาณในตัว
    • กระเป๋าเก็บอลูมิเนียม ที่ชาร์จไฟบ้าน AC adapter 100~240V, น้ำหนักถ่วง 10 ปอนด์
    • สามารถต่อ Leveling screw สำหรับตั้งระดับ 3 ตำแหน่งอย่างสะดวกและง่ายดายเข้ากับขาตั้ง (มีจำหน่ายต่างหาก) (ดูในคลิปด้านล่าง)
    • สามารถต่อ Pier / Tri-Pier ได้ (มีจำหน่ายต่างหาก)
    • ไม่รวมขาตั้งกล้องขนาด 2” stainless steel tripod (มีจำหน่ายต่างหาก)
    ฿43,990.00
  • ZWO ASI183MC Pro USB3.0 Cooled Color Astronomy Camera 256MB DDR3 Buffer

    ZWO ASI183MC Pro USB3.0 Cooled Color Astronomy Camera 256MB DDR3 Buffer

    1"size 5496x3672 @19fps Color USB3.0

    ฿27,990.00
  • ฟอกัสเซอร์ GSO 2" M-LRA 10:1 Linear Bearing Refractor Crayford Focuser-86mm

    ฟอกัสเซอร์ GSO 2" M-LRA 10:1 Linear Bearing Refractor Crayford Focuser-86mm

    GSO 2" M-LRA 10:1 Linear Bearing Refractor Crayford Focuser-86mm

    ฿6,990.00
  • แว่นขยาย Levenhuk Zeno Handy ZH7 Magnifier 74047

    แว่นขยาย Levenhuk Zeno Handy ZH7 Magnifier 74047

    The Levenhuk Zeno Handy ZH7 Magnifier is a classic handheld magnifier for studying small items. It is suitable for reading drafts and small font texts, examining defects in furniture and fabric, and for working with tiny objects. It is a perfect assistant in looking at photos or illustrations in albums as well as inspecting jewelry pieces and geography maps. The large lens diameter allows for working with wide areas all at once.

    ฿199.20
    SALE
  • แว่นขยาย Levenhuk Zeno Read ZR16 Magnifier 74100

    แว่นขยาย Levenhuk Zeno Read ZR16 Magnifier 74100

    Levenhuk Zeno Read ZR16 Magnifier is a magnifying optical tool for studying drafts, geography maps, schemes, engravings, and small text. It is a loyal companion to an archiver, librarian, student, research scientist, university teacher, and anyone who deals with documents and images. This magnifier can be used at home for reading or looking through photo albums.

    ฿496.00
    SALE
  • ZWO M48 sensor tilt adapter

    ZWO M48 sensor tilt adapter

    Product Description

    The M48 sensor tilt plate is independently developed by ZWO and specially made to match telescope with M48 thread. The thickness is 5mm. It has several screw holes on the surface so that you can easily connect it to the M68 OAG and APS-C & full frame camera like ASI2600/ASI6200/ASI2400.

    ฿1,290.00
  • Sky-Watcher Wave Pier Extension for EQ6 tripod for Wave 100i and 150i Mount Heads

    Sky-Watcher Wave Pier Extension for EQ6 tripod for Wave 100i and 150i Mount Heads

    Sky-Watcher Wave Pier Extension for EQ6 tripod for Wave 100i and 150i Mount Heads

    Allows the WAVE-100i and WAVE-150i Mount Heads to fit to the EQ6 2" Stainless Steel Tripod.

    ฿5,990.00

ขณะนี้ยังไม่มีผู้รีวิวสินค้ารายการนี้




ส่งให้เพื่อน

: *
: *
: *
พิมพ์ตัวอักษรที่เห็นในภาพ:


*
รหัสเป็น case-sensitive และจะต้องใส่ตรงตามที่กล่าวข้างต้น

รีวิว


Great set of LRGB Filters. Note that the focus needs to be adjusted during filter change to attain best focus. So you need to pair this with an EAF(auto focuser) or manually adjust focus all the time.
Niveth Kumar
Mar 14, 2025

ผู้ผลิต