All Farpoint Products are made in the USA at our facilities in Gold River, California.
How to select and fit a focus mask for your telescope:
In 2009, George Carey, an amateur telescope maker and astronomer from the UK, published a modification of previous focus mask designs to make a much more sensitive version of the device. This focus mask allows you quickly, easily and precisely focus your DSLR camera, webcam or CCD camera for astrophotography. The method is simple, very intuitive, and the device has universally been named after the inventor: The "Carey Mask".
Attach your camera to the telescope, center a fairly bright star in your telescope and achieve a rough focus. Then place the mask over the front aperture of your telescope by “hanging” it on the plastic screws from the front dew shield. Take a short exposure. The image of the star will show diffraction spikes.
The Bahtinov Mask requires you to judge when the central spike is midway between the two angle spikes. This is quite easy to do, but there is still a little uncertainty in determining the exact center alignment, especially when viewing in a DSLR viewfinder.
With the Carey mask the central spike idea has been abandoned. The angle between spikes has been considerably reduced. Instead of two sloping sets of slits and one central set, there are four sets of slits, with a small angle difference on each side of the mask as shown in the image below.
The diffraction pattern produced is two overlapping 'X' shapes with slightly differing angles, and at perfect focus the Xs will be symmetrical.
Inside and outside focus the Xs will be displaced. Because the angle of each X is slightly different, it will be easy to spot when out of focus, and also which way focus should be altered.
This animation shows focus being reached.
Farpoint manufactures this "lifesaving" astrophotography tool out of virtually indestructible ABS plastic, which comes in two major types and in a range of sizes. The mask pictured below left is a general purpose mask designed to fit refractors and Newtonian telescopes. The mask pictured below right is designed to fit Schmidt-Cassegrain telescopes. Both types of mask are available in a range of sizes to cover your imaging needs.
iPolarTM electronic polar scope additional adapter. This adapter only fit an iPolar camera with USB port on the side (#3339). It does not work with a SkyGuider Pro polar scope (#3339R) or an internal polar scope (#3339A)
T-adapter for 0.965" to M42x0.75 male thread, fit for telescopes with standard 0.965" focusers
Made of machined anodized aluminum, the inside of the adapter is fully baffled to minimize reflections
Threaded to accept standard 0.965'' filters
Connects with specific camera brand's T-ring adapters (sold separately) to connect your 0.965'' telescope focusers to your Nikon/Canon/Sony/Olympus/Panasonic etc. cameras
65PHQ is a flatfield astrograph newly launched after 80PHQ, 107PHQ, and 130PHQ. Instead of buying extra flatteners, calculating the back focus of the flattener, or making a tedious connection to match the correct distance, astrophotographers can simply equip it with any possible imaging accessories, make the target stay at the focus, and then the whole optical system is perfect for imaging.
65PHQ has a smaller size than other PHQ astrographs. 65PHQ has a focal ratio of f/6.4 and a focal length of 416mm. Instead of the quadruplet structure of other PHQs, the 65PHQ is a quintuplet with two ED glasses which offers excellent control of chromatic and other aberrations. With its self-flattening design, 65PHQ offers strong advantages in the astronomical shooting. It supports the full-frame image circle and has a fine spot diagram with tiny distortions of the peripheral stars.