Askar FMA180 PRO AF Kit

Askar FMA180 PRO AF Kit

รายละเอียด

คะแนนสินค้า
SKU
SSASFMA180PRO-KIT
ผู้ผลิต
จำนวนในสต๊อก
เหลือ 2 ชิ้น
น้ำหนัก
900.00 g
ราคาของเรา
฿2,990.00

ตัวเลือก

จำนวน (เหลือ 2 ชิ้น)

(จาก 1 ถึง 2)


สินค้า รายละเอียด

Askar FMA180 PRO AF Kit

With the upgrading of electronic astronomical accessories, electronic devices are more and more widely used in astronomical observation and astrophotography. To better meet the needs of astronomy amateurs, we launched the FMA180 PRO AF Kit.

 
 

The FMA180 PRO AF Kit is an astronomical accessory designed specifically for the FMA180 PRO lens to work with ZWO's EAF (electronic automatic focuser) to realize auto and more accurate focusing. By using this kit, astronomy amateurs can more easily focus the astrograph, thus improving the accuracy and efficiency of astronomical observation or astrophotography.

 

ASKAR FMA180 PRO AF KIT

 

Components

The FMA180 PRO AF Kit contains the following parts: A black square bracket to support the EAF; a synchronous belt, a synchronous pulley, and locking screws, two M6×8 socket head cap screws, and four M4×8 button head screws. Note that the FMA180 PRO and the ZWO's EAF appearing in the advertising videos or posters are not included in this kit and are for demonstration only.

 

ASKAR FMA180 PRO AF KIT

 

Installation Steps

First, remove the original black dovetail plate and finder base from the FMA180 PRO. There are two screw holes on one side of the black bracket, corresponding to the two screw holes on the bottom of the FMA180 PRO. Second, use a 2.5mm wrench to screw the two M4×8 button head screws to connect the EAF bracket and the FMA180 PRO.

Third, use a 1.2mm allen wrench to screw the M3×2 locking screws to connect the synchronous pulley and EAF, and put the EAF with the synchronous pulley into the bracket.

Forth, install the synchronous belt with one end over the FMA180 PRO and the other end over the synchronous pulley.

Fifth,adjust and fix the position of the EAF, and then use two M4×8 button head screws to fix the EAF and the bracket. Place the FMA180 PRO with the bracket on the vixen dovetail plate and secure it with two M6×8 socket head cap screws. The installation of the FMA180 PRO AF Kit is done.

Specifications

Video

  • สินค้าแนะนำ

  • รีวิว

  • ส่งให้เพื่อน

  • เคส Poetic HardBack Protective Case สำหรับ Kindle Fire HD 8.9 นิ้ว (สีดำ)

    เคส Poetic HardBack Protective Case สำหรับ Kindle Fire HD 8.9 นิ้ว (สีดำ)

    เคส Poetic HardBack Protective Case สำหรับ Kindle Fire HD 8.9 นิ้ว (สีดำ)

    • ออกแบบสำหรับ Kindle Fire HD 8.9" โดยเฉพาะ
    • มีถาดแข็งด้านหลังที่บาง เบา แต่แข็งแรง ปกป้อง Kindle Fire HD ได้ดี
    • มีช่องสำหรับเข้าถึงช่องเสียบและปุ่มต่างๆได้ (รวมถึงกล้อง)
    • มีที่เก็บปากกาสไตลัส
    • มียางรัดเพื่อฝาหน้า ปิดได้สนิดยิ่งขึ้น และใช้รัดในขณะเปิดฝา 360 องศา (ตามรูป)
    • ภายในเป็น micro fiber นุ่ม สัมผัสสบายและช่วยปกป้องอีกชั้นนึง
    • สั่งให้ Kindle Fire HD หลับหรือตื่นได้อัตโนมัติ เมื่อปิด-เปิดฝาหน้า
    • ขาตั้งในตัวทำมุมได้ 3 ตำแหน่ง

     

    ฿499.00
  • GSO 1.25" Erect Image Amici Prism Diagonal สำหรับฟอกัสเซอร์ขนาด 0.965", มุมเงย 45 องศา

    GSO 1.25" Erect Image Amici Prism Diagonal สำหรับฟอกัสเซอร์ขนาด 0.965", มุมเงย 45 องศา

    GSO 1.25" Erect Image Amici Prism Diagonal สำหรับฟอกัสเซอร์ขนาด 0.965", มุมเงย 45 องศา

    • สำหรับใช้ eyepiece ขนาด 1.25" กับกล้องดูดาวรุ่นเก่าที่มีขนาดฟอกัสเซอร์ 0.965"
    • เป็นอุปกรณ์ที่ใช้ต่อระหว่างกล้องและ eyepiece มุมเงย 45 องศาเพื่อให้การส่องทำได้สะดวกขึ้น โดยเฉพาะเมื่อต้องส่องวัตถุที่อยู่ภาคพื้นดิน เช่นส่องทิวทรรศน์ ส่องนก 
    • ให้ภาพที่ถูกต้อง ไม่กลับหัว ไม่สลับซ้าย-ขวา เหมาะใช้งานภาคพื้นดินตอนกลางวัน หรือภาคดาราศาสตร์เมื่อต้องการใช้ร่วมกับแผนที่ดาว
    • ใช้แก้ว prism ซึ่งไม่จำเป็นต้องมีการเคลือบสารสะท้อนเหมือนกระจก จึงใช้งานได้นานกว่า
    • วัสดุภายนอกทำด้วยพลาสติก ABS และอลูมิเนียม
    • น้ำหนัก 108g (ไม่รวม packaging) มีฝาปิด 2 ด้านในกล่อง
    • ผลิตในไต้หวัน รับประกัน 1 ปี

    โปรดทราบ: ภาพสินค้าเป็นสำหรับ focuser 1.25" สำหรบรุ่นนี้ส่วนต่อกับ focuser จะมีขนาด 0.965"

    ฿1,290.00
  • ฟิลเตอร์ส่องดวงอาทิตย์ Thousand Oaks ID 8.00" (203mm) แบบ Glass 2+ #8000

    ฟิลเตอร์ส่องดวงอาทิตย์ Thousand Oaks ID 8.00" (203mm) แบบ Glass 2+ #8000

    ฟิลเตอร์ส่องดวงอาทิตย์ Thousand Oaks ID 8.00" (203mm) แบบ Glass 2+ #8000

    • กระจกคุณภาพสูงที่คัดด้วยมือ เคลือบสาร Thousand Oaks Optical's Solar II Plus coating จึงมีความคงทนมากที่สุดรุ่นนึงในตลาด
    • สวมเข้ากับขอบของหน้ากล้องอย่างแน่นพอดี (เสริมด้วย felt lining ที่รวมอยู่ในชุด) เพื่อป้องกันการหลุดของฟิล์เตอร์ กรองแสงดวงอาทิตย์ที่จะเข้าสู่หน้ากล้องได้ 99.999%
    • ขอบนอกทำด้วยอลูมิเนียมที่เบาทนทานและแข็งแรง ขอบในเสริมวัสดุที่ช่วยให้การสวมใส่แน่นกระชับ (friction fit) เพื่อเพิ่มผิวสัมผัสกับขอบกล้องดูดาว ป้องกันอุบัติเหตุที่อาจทำให้ฟิลเตอร์หลุดโดยง่าย
    • ส่งผ่านแสงเพียง 1/1000 ของ 1% (Optical Density 5) เหมาะสำหรับใช้สังเกตด้วยตาและการถ่ายภาพ
    • ขนาดขอบใน = 8.00" (ใช้ได้กับกล้องที่มีขอบนอกระหว่าง 7.75" ถึง 8.00" โดยใช้ felt lining เสริมขอบในของฟิลเตอร์ 3-6 ตำแหน่ง)
    • ถ้าใช้งานอย่างระมัดระวัง ฟิลเตอร์ Thousand Oaks Optical รุ่นนี้สามารถอยู่ได้ไม่ต่ำกว่า 20 ปี และอาจนานชั่วชีวิตคน
    • แบรนเนมคุณภาพจาก USA; รับประกัน 2 ปี
    ฿3,790.00
  • ฟิลเตอร์ส่องดวงอาทิตย์ Thousand Oaks ID 5.75" (146mm) Solarlite  #S-5750

    ฟิลเตอร์ส่องดวงอาทิตย์ Thousand Oaks ID 5.75" (146mm) Solarlite #S-5750

    ฟิลเตอร์ส่องดวงอาทิตย์ Thousand Oaks ID 5.75" (146mm) Solarlite  #S-5750

    • ใหม่! รุ่น Solarite คงคุณภาพของภาพของรุ่นกระจก + จุดแข็งที่เหนียวและเบาของ polymer เข้าด้วยกัน จึงมีความคงทนมากที่สุดรุ่นนึงในตลาด
    • วัสดุฉีกขาดยาก ทนต่อการเป็นรูหรือรอยขูดขีด น้ำหนักเบา ไม่ต้อง rebalance กล้องหลังสวมใส่
    • คงสีเหลืองส้มของดวงอาทิตย์ตลอดทั้งพื้นที่
    • สวมเข้ากับขอบของหน้ากล้องอย่างแน่นพอดี (เสริมด้วย felt lining ที่รวมอยู่ในชุด) เพื่อป้องกันการหลุดของฟิล์เตอร์ กรองแสงดวงอาทิตย์ที่จะเข้าสู่หน้ากล้องได้ 99.999%
    • ขอบนอกทำด้วยอลูมิเนียมที่เบาทนทานและแข็งแรง ขอบในเสริมวัสดุที่ช่วยให้การสวมใส่แน่นกระชับ (friction fit) เพื่อเพิ่มผิวสัมผัสกับขอบกล้องดูดาว ป้องกันอุบัติเหตุที่อาจทำให้ฟิลเตอร์หลุดโดยง่าย
    • ส่งผ่านแสงเพียง 1/1000 ของ 1% (Optical Density 5) เหมาะสำหรับใช้สังเกตด้วยตาและการถ่ายภาพ
    • ขนาดขอบใน = 5.75" (ใช้ได้กับกล้องที่มีขอบนอกระหว่าง 5.50" ถึง 5.75" โดยใช้ felt lining เสริมขอบในของฟิลเตอร์ 3-6 ตำแหน่ง)
    • ถ้าใช้งานอย่างระมัดระวัง ฟิลเตอร์ Thousand Oaks Optical รุ่นนี้สามารถอยู่ได้ไม่ต่ำกว่า 20 ปี และอาจนานชั่วชีวิตคน
    • สินค้าแบรนเนมคุณภาพจาก USA; รับประกัน 2 ปี
    ฿3,290.00
  • Optolong IR Pass (685nm) Filter - 2"

    Optolong IR Pass (685nm) Filter - 2"

    Optolong IR Pass 685nm Filter - 2”

    The Optolong IR Pass 685nm Filter blocks wavelengths below 670nm to enhance contrast and surface detail and reduce the effects of seeing when used in IR-LRGB imaging of the moon and planets. Atmospheric seeing and distortion diminish as you move further away from visible light into the infrared, and since CCD and CMOS sensors are sensitive to IR light, imaging in the infrared will improve your results.

    ฿3,790.00
  • Optolong improved Narrowband Ha SII OIII 6.5nm filter set, 31mm unmounted

    Optolong improved Narrowband Ha SII OIII 6.5nm filter set, 31mm unmounted

    Optolong improved H-Alpha, OIII, SII 6.5nm narrowband filter Kit, 31mm unmounted

    ฿17,990.00
  • SVBONY 5-Position Filter Wheel, 1.25''

    SVBONY 5-Position Filter Wheel, 1.25''

    SVBONY 5-Position Filter Wheel, 1.25'' 

    • High-quality telescope filter wheel allows you to quickly and easily change filters
    • Features number labels that allows you to quickly place the filter of your choice into the light path
    • Robustly constructed with standard 1.25" (M28.5X0.6) filter interface
    • Can be attached to your focuser either by the supplied 1.25" nosepiece adapter or via a T-thread
    • Includes 1.25" eyepiece adapter, 1.25" focuser nosepiece, T-2 camera adapter and locking ring and 42mm metal dust cap
    ฿2,500.00
  • เมาท์ระบบคอมพิวเตอร์ Sky-Watcher EQ3 Pro SynScan Mount พร้อมขาตั้งสแตนเลส

    เมาท์ระบบคอมพิวเตอร์ Sky-Watcher EQ3 Pro SynScan Mount พร้อมขาตั้งสแตนเลส

    เมาท์ระบบคอมพิวเตอร์ Sky-Watcher EQ3 Pro SynScan Mount พร้อมขาตั้งสแตนเลส

    • Complete motorisation with control in both axes through high-quality and quiet stepper motors
    • Automatic accurate tracking of the celestial objects
    • Automatic locating of more than 42.900 objects
    • Autoguider interface for astrophotography
    • Positioning precision of about one arc minute
    • Maximum positioning speed of 3.4° per second
    • Electronic reduction of the periodic error - P.E.C.
    • USB connectivity
    • Firmware update via internet
    • Modern quick release system - like with the EQ5 or bigger mounts
    • Weight w. tripod (without counterweights): approx. 10 kg
    ฿27,990.00
  • เมาท์ Sky-Watcher EQ5 Mount พร้อมขาตั้งแบบสแตนเลส

    เมาท์ Sky-Watcher EQ5 Mount พร้อมขาตั้งแบบสแตนเลส

    เมาท์ Sky-Watcher EQ5 Mount พร้อมขาตั้งแบบสแตนเลส

    • Maximum payload capacity approx 9.1kg. 
    • Aluminium tripod with accessory tray and bubble level. 
    • Slow-motion control knobs allow for continuous manual tracking of celestial objects. 
    • Full 360º worm-gear tracking controls on both R.A. and DEC. axes. 
    • Metal setting circle dials. 
    • An optional polarscope is available. 
    • Optional single-axis and dual-axis D.C. motor drives can be installed for continuous tracking
    • Tripod legs come in 2 versions: aluminum or steel. Please see product name for version.
    ฿23,990.00

ขณะนี้ยังไม่มีผู้รีวิวสินค้ารายการนี้




ส่งให้เพื่อน

: *
: *
: *
พิมพ์ตัวอักษรที่เห็นในภาพ:


*
รหัสเป็น case-sensitive และจะต้องใส่ตรงตามที่กล่าวข้างต้น

รีวิว


As absolutely beginners in stargazing my daughter and I find this 32mm eyepiece very valuable for the eyepiece collection. We have a 10, 15 and 25mm and a barlov already and it was time to look a bit wider in the sky. The GSO 32 does the job well. And as always the good service from Thaiexcite is appreciated.
Cattia & Claus
Oct 13, 2017

ผู้ผลิต

สินค้าที่ดูล่าสุด