This power supply works for most iOptron mounts except (CEM120, CEM70, CEM70G, CEM70EC, GEM45G, CEM40G). It also works for other equipment that use 5.5mm x 2.1mm DC plug.
12V DC power supply for iOptron CEM120 telescope mount.
AC Input: 100V to 240V, DC Output: 12V 5A
Rated for 60 Watts
DC plug size: 5.5mm x 2.5mm
This power supply works for (CEM120, CEM70, CEM70G, CEM70EC, GEM45G, CEM40G) mounts, CEM60 cable management input panel, as well as other equipment that use 5.5mm x 2.5mm plug.
Top loading carry bag. Perfect for carrying tripod for SkyTracker, ZEQ25,(1.5-inch tripod version), or SmartEQ. Will hold other tripods also (see dimensions).
Durable stictched fabric with additional pockets to carry small accessories to your site. A small tripod can be top loaded into the main compartment. And two outer pockets can hold the rest of your equipment. One pocket is large enough to hold your SkyTracker camera mount. The other pocket can hold a polar scope and ball head.
A Vixen style dovetail plate adapter designed for the iOptron SkyTrackerTM camera mount. It also fits all iOptron mounts, as well as, other popular mounts.
Rugged soft case designed to hold a complete iOptron SmartStar system, including tripod, mount, hand controller and accessories. It also holds iOptron's R80, N114, or MC90 OTA.
Padded shoulder straps for easy carrying
Made of heavy, water-resistant polyester/nylon with full-length zipper and handle strap
A set of 3 Star Knobs for the MiniTower/MiniTower II/MiniTower Pro/AZ Mount Pro level adjustment. A center post for use on Tri-Pier/Pier/MiniPier, as well as your own tripod/pier.
Top loading carry bag. Perfect for carrying 2" tripod for CEM60/CEM60EC, iEQ45/iEQ45 Pro, iEQ30/iEQ30 Pro, MiniTower/MiniTower Pro* and CEM25/ZEQ25 mount. Will hold other tripods also (see dimensions).
Durable padded fabric with two adjustable shoulder straps and a waist buckle strap.
* Does not fit 2" MiniTower Pro tripod with triangle mounting plate.
ฟิลเตอร์ส่องดวงอาทิตย์ iOptron 70mm Adjustable Solar Filter (Solarite), ID 84-106mm
White light solar filter with SolarLite solar film from Thousand Oaks Optical which has the optical quality of the glass with the advantages of impregnated polymer. Unlike the pale white image from Mylar film, it provides a nature yellow-orange solar image. The filter will never develop pin holes or scratches that can let in light and ruin a filter. Will not tear or puncture. It also has a flat surface compared to other thin film filters that have wrinkles and creases. The machined aluminum fixture makes the filter very sturdy yet light weight.
This filter fits most 70mm to 90mm telescope tubes, as well as some camera lenses. It has an inner diameter from 84mm to 106mm and clear aperture of 70mm.
32-channel internal GPS module with compartment to convert your SmartStar Cube -E mount to a GPS mount. (The mount needs to have a removable top plate.)
Here is the Installation Instruction. Please check it before ordering. Contact iOptron if you are not sure.
This GPS module also works as a replacement unit for Cube-G, Cube Pro, MiniTower, MiniTower II and MiniTower Pro.
Aluminum extension pier for SkyHunter mount. It has 3/8-16 threaded mounting holes on both top and bottom flanges. It can be added onto iOptron #3221 tripod, as well as any tripod has a 3/8 mounting screws, or 1/4 via a thread converter.
The iOptron high performance ball head is designed for smooth precision movement. It can be independently controlled for pan and tilt movement. The base has a wide diameter of 2 inches for 360 degree precision pan measurement. The quick release plate system is universal, compatible to all major brands. Redundant plate lock and safety lock provides secure mounting of your camera.
iOptron’s PowerWeightTM rechargeable counterweight battery pack is designed for using with various iOptron mounts. It can be fitted onto a mount which has a counterweight (CW) shaft with a diameter of 20mm or 28mm. Use this battery pack in place of your traditional CW, or as an additional CW, and avoid long extension cords.
