Now you can convert your telescope mount into a wirelessly controllable one with this new the new StarFiTM Wi-Fi adapter! With iOptron's StarFi you'll be wirelessly connected. You can wirelessly control your telescope mount with your favorite planetarium software through iOptron ASCOM driver and Commander. You can also connect the mount to your SmartPhone/Tablet to use software like Sky Safari to control your mount.
Features
Supports 802.11b/g/n
Can be constructed as AP (default) or STAtion mode
Password protection
Connect to Computer/Tablet/SmartPhone
Supports both iOS and Android mobile devices through WIFI connection
Allow you to use your favorite planetarium software to control the mount via iOptron ASCOM connection
Support Sky Safari Pro for both iOS and Android
Currently supported mounts:
CEM70/CEM60/CEM60-EC/iEQ45 Pro/iEQ30 Pro
iEQ45/iEQ30 w/8407(need a DB9 RS232 male to male connector)
iEQ45 w/8406 (need a DB9 RS232 male to male connector and an iOptron RS232-RJ9 cable #8412)
ZEQ25/CEM25
SmartEQ/Pro (need an external 5V power source. A USB power cable is available.)
Cube-II (E/G/A series)
DOES NOT support original Cube/MiniTower/SmartStar PR mounts
May work with other manufacture's mounts (need a DB9 RS232 male to male connector and an iOptron RS232-RJ9 cable #8412)
สายเสียบไฟจากแบตรถยนต์ iOptron 12V Car Recharger and Cable เพื่อใช้กับกล้องดูดาวหัวเสียบ 5.5x2.5มม
สำหรับกล้องดูดาว iOptron สามารถต่อเข้ากับที่จุดบุหรี่ในรถยนต์ที่จ่ายไฟ 12V หรือจากอุปกรณ์จ่ายไฟแบบแบตแห้งเช่น Celestron Power Tank
A cigarette-type power lead for telescopes. No more buying batteries! Easy connection to car cigarette lighter output. Perfect for campsites or other remote locations.
5.5mmX2.5mm DC plug, center positive. Please check your device DC socket size before buying.
Part of the Optolong SHO-3nm filter kit, which includes SII 3nm, H-Alpha 3nm, and OIII 3nm narrowband filters, generally working with astronomical monochrome cooling CCD and modified DSLR imaging in each single-channel. Corresponding with RGB channel (HA, OIII, SII), photographers can process Hubble images by astronomical post processing software.
The Crayford GSO eyepiece lift with linear bearings is a modern, technically advanced spectacle lift, which is a breakthrough among this type of device. The structure was designed based on two precision bearings moving on a steel rail, which improves the precision of adjustment and ensures increased load capacity (4.1 kg) compared to standard lifts. This allows stable attachment of even heavy astrophotography accessories.
ZWO has released a new 3-inch FF80APO 0.76X full frame reducer with a three-element optical design, including one element made of ED glass. Its reduction factor is 0.76x, which gives the FF80APO f/7.5 astrograph a shortened focal ratio of f/5.7 and a shorter focal length of 312mm. This allows for less total integration time and a wider field of view, bringing more convenience and possibilities for your wide-field deep sky imaging.
The reducer has a rear interface that attaches to the FF80APO telescope tube’s included four-segment camera extension tube. The back focus is the standard 55mm, and it has a built-in M48X0.75 2-inch filter thread for easy attachment.
Very nice look and good quality red dot finder. Easy to use with hex screws for perfect fine adjustment (very precise pointing).
Well machined and painted, comes with bracket and mount.