ZWO Anti-dew heater strip

แบ่งปันสิ้นค้าชิ้นนี้

รายละเอียด

คะแนนสินค้า
SKU
ZWO-Anti-dew
ผู้ผลิต
จำนวนในสต๊อก
เหลือ 1 ชิ้น
น้ำหนัก
100.00 g
ราคาของเรา
฿690.00

ตัวเลือก

จำนวน (เหลือ 1 ชิ้น)

(จาก 1 ถึง 1)


  • รายละเอียด

  • สินค้าแนะนำ

  • รีวิว

  • ความคิดเห็น

  • ส่งให้เพื่อน

Product Description

The anti-dew heater strip is used for anti-dew on the front window of the ASI cooled cameras.

This  kit includes the zip-tie, anti-dew heater strip , an Y power cord and two spacers:

Anti-dew-Kit-NEW

The thickness of the anti-dew heater strip is 0.2~0.3mm.

The “Y” power cord is designed to connect in-line with the cooler power supply for convenience.

The thickness of the spacers is 0.3mm and 0.5mm. They are used for aligning the camera and EFW.

And we recommends 12V at 0.35A  DC adapter where the heating power on the strip is ~4.2 watts. You can use one and same power cord to power both the fan and heater simultanously, but make sure not to exceed recommended amount of Ampere.

NOTE: heater strip is not necessary!

ASI071MC-P/ASI6200MC-P/ASI6200MM-P/ASI2600MC-P cameras come with anti-dew heater will heat protect window to avoid any dew problems.

For ASI183/ASI1600/ASI294/ASI533 cameras, The heat emitting of TEC will be conducted to the camera case and avoid any dew problems when TEC cooling system working.

How to use it?

  1. Tear out the protective film on adhesive tape
Anti-dew-theback0
2. Put the anti-dew heater strip on the front facing of the camera and make sure the black cable is in the right position (lining next to the DC plug at the rear end)

Anti-dew-step2

Anti-dew-step2.2

3. Tie the black cable with a zip-tie on the camera body.Anti-dew-step4

4. Plug in the power cord, then everything is done.

Anti-dew-step5

Anti-dew-step6.1

 

Now you should be dew-free while shooting with the camera.

NOTICE: Be careful about welding portion, it is vulnerable can not holding very strong pull.

  • แผ่นไล่ยุงกันยุง ThermaCELL Mosquito Repellent Refill Value Pack ชุดใหญ่ (รวม Refill 4 ชุด)

    แผ่นไล่ยุงกันยุง ThermaCELL Mosquito Repellent Refill Value Pack ชุดใหญ่ (รวม Refill 4 ชุด)

    แผ่นไล่ยุงกันยุง ThermaCELL Mosquito Repellent Refill Value Pack ชุดใหญ่ (รวม Refill 4 ชุด)

    • Refill 4 ชุด: ชุดนึงมีแผ่นกันยุง 3 แผ่น + เชื้อเพลิง butane 1 ขวด
    • ไล่ยุงได้ต่อเนื่อง 48 ชม
    • ใช้ร่วมกับเครื่องไล่ยุงกันยุงไร้สายแบบพกพา ThermaCELL Cordless Portable Mosquito Repellent Appliance
    ฿649.00
    SALE
  • ฟิล์มฟิลเตอร์ส่องดวงอาทิตย์ Baader AstroSolar Photo Film ขนาด 100x50ซม. OD3.8 (ใช้เพื่อถ่ายรูปเท่านั้น)

    ฟิล์มฟิลเตอร์ส่องดวงอาทิตย์ Baader AstroSolar Photo Film ขนาด 100x50ซม. OD3.8 (ใช้เพื่อถ่ายรูปเท่านั้น)

    ฟิล์มฟิลเตอร์ส่องดวงอาทิตย์ Baader AstroSolar Photo Film ขนาด 100x50ซม. OD3.8 (ใช้เพื่อถ่ายรูปเท่านั้น)

    • ฟิล์มคุณภาพสูงระดับโลก ในรูปแบบที่ให้มือสมัครเล่นสามารถนำไปทำฟิล์เตอร์ส่องดวงอาทิตย์ด้วยตัวเองอย่างง่ายๆและปลอดภัย ในราคาประหยัด
    • ฟิล์มของ Baader AstroSolar เป็นยี่ห้อและรุ่นที่ได้สร้างมาตรฐานทางด้านคุณภาพและความปลอดภัยของฟิลเตอร์ดวงอาทิตย์ และถูกใช้ผลิตฟิลเตอร์ดวงอาทิตย์ของหลายๆยี่ห้อดัง เช่น Celestron, Orion, Kendrick, AstroZap เป็นต้น Baadar AstroSolar Film ยังได้รับรางวัล "สินค้าดาราศาสตร์แห่งทศวรรษ" ในสหรัฐอเมริกาอีกด้วย
    • คุณภาพส่งผ่านแสงแบบ diffraction limited - การเคลือบสารบนฟิล์มมีความสม่ำเสมอสูง จึงไม่เกิดการบิดเบือนแสงที่ส่องผ่านเมื่อเทียบกับฟิลเตอร์กระจกหลายยี่ห้อที่ไม่ได้ผ่านกระบวนการทำให้ผิวเรียบ ภาพจาก AstroSolar Film จึงให้ภาพดวงอาทิตย์ที่คมชัด contrast สูงมาก
    • ทนทาน - ถึงแม้วัสดุจะบางเฉียบ แต่ AstroSolar Film ก็มีความทนทานต่อการฉีกขาดสูง
    • ได้สีดวงอาทิตย์ที่เป็นสีขาวเป็นกลาง (white neutral) ซึ่งใกล้เคียงกับสีดวงอาทิตย์ที่แท้จริงก่อนผ่านชั้นบรรยากาศโลก (ต่างจากฟิลเตอร์แผ่น Mylar ที่ให้สีดวงอาทิตย์เป็นสีฟ้าไม่น่าดู) และง่ายต่อการแสดงรายละเอียดและ contrast และสะดวกในการใช้งานร่วมกับฟิลเตอร์สีเมื่อต้องการเน้นรายละเอียดเฉพาะของดวงอาทิตย์
    • AstroSolar Photo Film ถูกพัฒนาเบื้องต้นในห้องแลปสำหรับ nuclear และ particle physics ได้รับมาตรฐาน CE ผลิตในประเทศเยอรมันี
    • สามารถดูวิธีการทำกรอบฟิลเตอร์ขึ้นเองจากขั้นตอนของผู้ผลิตด้านใน
    ฿3,890.00
  • iOptron Controller Cable - 6P6C

    iOptron Controller Cable - 6P6C

    This 6P6C cable connects your Go2Nova Controller to your mount. It also connects between R.A. and DEC ports. It works with all iOptron mounts.

    ฿890.00
  • Optolong S-II Narrowband (3nm) filter - 36mm unmounted

    Optolong S-II Narrowband (3nm) filter - 36mm unmounted

    Optolong S-II Narrowband (3nm) filter - 36mm unmounted

    Part of the Optolong SHO-3nm filter kit, which includes SII 3nm, H-Alpha 3nm, and OIII 3nm narrowband filters, generally working with astronomical monochrome cooling CCD and modified DSLR imaging in each single-channel. Corresponding with RGB channel (HA, OIII, SII), photographers can process Hubble images by astronomical post processing software.

    ฿11,990.00
  • ฟอกัสเซอร์ GSO 2" M-LRN 10:1 Linear Bearing Crayford Focuser สำหรับกล้องสะท้อน (พร้อมฐานยึดความโค้งเหมาะกับกระบอกขนาด 176mm)

    ฟอกัสเซอร์ GSO 2" M-LRN 10:1 Linear Bearing Crayford Focuser สำหรับกล้องสะท้อน (พร้อมฐานยึดความโค้งเหมาะกับกระบอกขนาด 176mm)

    ฟอกัสเซอร์ GSO 2" M-LRN 10:1 Linear Bearing Crayford Focuser สำหรับกล้องสะท้อน (พร้อมฐานยึดความโค้งเหมาะกับกระบอกขนาด 176mm)

    The Crayford GSO eyepiece lift with linear bearings is a modern, technically advanced spectacle lift, which is a breakthrough among this type of device. The structure was designed based on two precision bearings moving on a steel rail, which improves the precision of adjustment and ensures increased load capacity (4.1 kg) compared to standard lifts. This allows stable attachment of even heavy astrophotography accessories.

    ฿6,990.00
  • ZWO Filter Drawer (M42) for 2" Mounted Filter (2nd Gen)

    ZWO Filter Drawer (M42) for 2" Mounted Filter (2nd Gen)

    New M42 Filter Drawer (2nd Gen)

    New 2″ filter drawer featuring the anti-light-leaking design that can effectively solve the light leaking issue under long exposure.

    ฿2,790.00
  • ZWO Spare Filter Holder (2nd Gen) for FD-Nikon / FD-EOS / FD-M54-II / FD-M42-II

    ZWO Spare Filter Holder (2nd Gen) for FD-Nikon / FD-EOS / FD-M54-II / FD-M42-II

    ZWO Spare Filter Holder (2nd Gen) for FD-Nikon / FD-EOS / FD-M54-II / FD-M42-II

    New 2″ filter drawer featuring the anti-light-leaking design that can effectively solve the light leaking issue under long exposure.

    ฿1,290.00
  • *PREORDER* Optolong L-Pro Clip Filter for Canon EOS-R (EOS R/Ra RP R5 R6) Cameras

    *PREORDER* Optolong L-Pro Clip Filter for Canon EOS-R (EOS R/Ra RP R5 R6) Cameras

    Optolong L-Pro Clip Filter for Canon EOS-R Cameras (EOS R/Ra、EOS RP、EOS R5、EOS R6)

    ฿8,790.00
  • *PREORDER* ZWO FF80 APO 0.75× Full Frame Reducer

    *PREORDER* ZWO FF80 APO 0.75× Full Frame Reducer

    FF80APO 0.76X Full Frame Reducer

    ZWO has released a new 3-inch FF80APO 0.76X full frame reducer with a three-element optical design, including one element made of ED glass. Its reduction factor is 0.76x, which gives the FF80APO f/7.5 astrograph a shortened focal ratio of f/5.7 and a shorter focal length of 312mm. This allows for less total integration time and a wider field of view, bringing more convenience and possibilities for your wide-field deep sky imaging.

    The reducer has a rear interface that attaches to the FF80APO telescope tube’s included four-segment camera extension tube. The back focus is the standard 55mm, and it has a built-in M48X0.75 2-inch filter thread for easy attachment.

    ฿8,990.00

ขณะนี้ยังไม่มีผู้รีวิวสินค้ารายการนี้




ส่งให้เพื่อน

: *
: *
: *
พิมพ์ตัวอักษรที่เห็นในภาพ:


*
รหัสเป็น case-sensitive และจะต้องใส่ตรงตามที่กล่าวข้างต้น

รีวิว


I have used the camera for 8 all night imaging sessions so far and it has given me no problems whatsoever. The adapters included in the box were sufficient to let me connect the camera to a ZWO EFW and the telescope and get the correct backfocus. Driver installation was straightforward, no issues. So far I've only operated the camera in Bin2 mode, Bin1 mode looks interesting!
John Sim
Jan 29, 2024

ผู้ผลิต