ASI6200MM/MC Pro uses Sony’s back-illuminated IMX455 Full Frame format native 16-bit ADC sensor. It has3.76µm, ultra-low 0.86e readout noise and an innovative breakthrough resulting in zero amp-glow.
Note:
External power supplies are needed for all ASl-cooled cameras. We recommend you use a 12V@3A~5A DC adapter (D5.5×2.1mm, center pole positive) or a lithium battery with 11-14V to power the camera. Be aware that using a power supply out of this voltage range will probably lead to irreparable damage to the camera.
The dovetail groove is designed for ASIAIR PLUS to connect Vixen dovetail plate. It can help achieve more convenient and flexible installation methods compared to the original dovetail plate of ASIAIR PLUS.
SvBony SV172 Dew Heater for Telescopes and Camera Lens, 320mm
Designed for astronomy telescopes and cameras, protecting optical devices like telescopes and cameras from fogging or freezing
Prevents dew condensation from forming on the glass surface
Provides even heat distribution. Power-efficient design will not result in an extra drain on your power supply.
Three-speed regulator strong-medium-weak heating modes, you can adjust the temperature in different situations
Width of the 50mm narrow width design, will not block your field of view and will not have dark corners in the field
Great heat preservation effect: Imitating OK cloth, SBR and Black-T three-layer keep warm material fits the lens better, fast and even heating
Alloy fiber heating wire provides super fast and continuous warming, silicone insulation process can prevent internal short circuit
Measure the circumference of the telescope tube or camera lens (or measure the tube diameter - not the scope aperture - ×3.14). Compatible with OD of telescopes/lenses below 101mm