Optolong LRGB Imaging Filter Set - 31mm Unmounted

รายละเอียด

คะแนนสินค้า
SKU
OPLRGB-031
ผู้ผลิต
จำนวนในสต๊อก
เหลือ 1 ชิ้น
น้ำหนัก
150.00 g
ราคาของเรา
฿8,290.00

ตัวเลือก

จำนวน (เหลือ 1 ชิ้น)

(จาก 1 ถึง 1)


  • รายละเอียด

  • สินค้าแนะนำ

  • รีวิว

  • ความคิดเห็น

  • ส่งให้เพื่อน

A. About Optolong's LRGB FIlter Set

The Optolong LRGB Filter Set is designed for maximum contrast and with extremely high gradients for clear differentiation of colors. The LRGB filter set divides the spectrum into its components: red, green, blue and luminance.

The OIII emission overlaps on blue and green filters with maximum transmission to allow high efficiency and natural color imaging. The gap between green and red filters serves to block out the primary Sodium (Na) light pollution line at 589nm and improves color balance and separation.

B. Main Uses and Performance

  • Works well with debayered monochrome CCD cameras.
  • Suitable for deep sky and planetary CCD imaging.
  • RGB imaging allows equal weighting factors for each channel which is very important for automated imaging.
  • The ideal raw material for image processing in the sRGB color space is available with the LRGB filter set and a monochrome CCD camera.

C. Spectral Curve Transmission Characteristics

  • 95% transmission at passband.
  • High and precise blocking of offband.
  • It also blocks out infrared wavelengths (700-1100nm) so a separate IR cut-off filter is not required for imaging applications.

D. Technical Specifications

  • Both surfaces are fine optically polished, accurate to 1/4 wavelength or better, and parallel to within 30 seconds or arc.
  • 2mm thick Schott B270 optical glass substrate material.
  • Very high surface quality of 60/40 or better (US Military Spec MIL-O-13830).

E. Optical Coating Specifications

  • Multi layer anti-reflection coated.
  • Non-cementing optical substrate coating.
  • Electron-beam gun evaporation with Ion-assisted deposition coating technology for durability and resistance to scratching, as well as stability on CWL (central wavelength) so that there is no deviation due to temperature changes during use.
  • Precise and homogeneous coatings ensure high values of desired passband and blocking of unwanted offband.
  • Every single filter is tested and passed by Optolong before shipping to dealers.

 

WARNING: Optolong filters are not designed for direct solar observation. NEVER use these filters for observing the Sun, or permanent eye and equipment damage will result.

Additional Information

How to read the chart?

▲The horizontal axis is the Wavelength in Nanometers(nm).

▲The vertical axis is transmission in %.

▲The WHITE line shows the transmission of the L-CCD filter. R-CCD filter line is shown in RED. G-CCD filter line is shown in GREEN. And the B-CCD linke is shown in BLUE.

 LRGB Filters Performance

Ⅰ. M51 © 李召麒

Technic Data:
Telescope: GSO 10" RC
Camera: QHYCCD QHY 695A
Mount: SkyWatcher AZ EQ6 GT
Processing: Adobe Photoshop CC, PixInsight 1.8.8
Filters: Optolong B, Optolong G, Optolong R, Optolong L
Date: 2020年1月2日
Exposure: 100x300"
Copyright@李召麒

 

 

Ⅱ. Globular Cluster M5© Astrodoc Ron Brecher   

Globular cluster M5 contains hundreds of thousands of stars.and is one of my favourite objects to view in any scope. Bright globular clusters remind me of sugar spilled on a black table cloth.

Tekkies:

Sky-Watcher Esprit 150 f/7 refractor, QHY 16200-A camera, 

Optolong L, R, G and B filters, Paramount MX, unguided.

Acquisition, and focusing with TheSkyX. Automation with CCDCommander.

Equipment control with PrimaLuce Labs Eagle 3 Pro computer.

All pre-processing and processing in PixInsight. Acquired from my SkyShed in Guelph.

No Moon, average to above average transparency and average seeing. Data acquired May 25 – June 4, 2019.

23x10m L, 19x3m L, 16x5m R, 16x5m G and 15x5m B (Total = 8hr42m)
Image scale 1.15 arcsec per pixel

 

 

III. van den Bergh 152 and Barnard 175 © Astrodoc Ron Brecher

van den Bergh 152 (vdB 152; a.k.a. Cederblad 201) is the prominent blue reflection nebula on the right side of this image. It lies at the end of Barnard 175, the pillar of dust filling this field. The dark area connected to vdB is a Bok globule, a dense accumulation of cosmic dust from which stars are often born. The whole complex lies in the direction of the constellation Cepheus, about 1400 light years away and spanning 7 light years. Interestingly, the bright star illuminating vdB 152 was likely not born within this complex as it is moving through space at a different speed than the nebula. 

Tekkies:

Sky-Watcher Esprit 150 f/7 refractor, and QHY 16200-A camera with Optolong LRGB filters. Acquisition, focusing, and control of Paramount MX mount, unguided, with TheSkyX. Focus with Optec DirectSync motor and controller. Automation with CCDCommander. Equipment control with PrimaLuce Labs Eagle 3 Pro computer. All pre-processing and processing in PixInsight. Acquired from my SkyShed in Guelph. Average or better transparency and seeing. Data acquired June 25-July 1, 2020 in a moderately moonlit sky.

90x5m L, 36x5m R, and 22x5m G and B (Total = 11hr10m)
Image scale 1.15 arcsec per pixel



About Optolong

While Optolong is a relative newcomer to the astronomy industry, they are no strangers to optics and filters. Optolong is a division of Yulong Optics Company, a high tech company specializing in optical filter design and production. Their products include bandpass filters, flourescence filters, edge filters, longpass and shortpass filters, beam splitters, anti-reflection coatings, optical mirrors and, of course, astronomical filters.

Established in 1999 and based in Kunming City, China, Optolong/Yulong provides nearly 2000 types of optical filter coatings annually to customers worldwide in a wide variety of industries and applications.

  • ปากกาสไตลัส TruGlide Stylus with Conductive Microfiber Tip for Touchscreens รุ่นมีที่เสียบกับรูหูฟ้ัง (สีดำคลาสสิค)

    ปากกาสไตลัส TruGlide Stylus with Conductive Microfiber Tip for Touchscreens รุ่นมีที่เสียบกับรูหูฟ้ัง (สีดำคลาสสิค)

    TruGlide stylus มีปลายที่ทำด้วยผ้า Micro Fiber พิเศษ ผิวสัมผัสกับหน้าจอจึงมีความลื่นไหลกว่าปลายที่เป็นยาง และยังมีคุณสมบัติที่ทาง LYNKtec ระบุว่า TruGlide ทนทานมากกว่า Stylus ที่ใช้ปลายชนิดยางถึง 10 เท่า  ขนานยาว 8 ซม เป็นรุ่นสะดวกในการพกพา

    Product Features

    • Patented conductive microfiber tip glides smoothly
    • Smaller tip provides greater accuracy
    • Ten times more durable than leading rubber tips
    • Sized to pair perfectly with your device - Tether plugs into headphone jack
    • 3.2inches (8cm) length, .2 ounces (5.7g)
    ฿290.00
  • GSO 1.25" Erect Image Amici Prism Diagonal, มุมเงย 45 องศา

    GSO 1.25" Erect Image Amici Prism Diagonal, มุมเงย 45 องศา

    GSO 1.25" Erect Image Amici Prism Diagonal, มุมเงย 45 องศา

    • เป็นอุปกรณ์ที่ใช้ต่อระหว่างกล้องและ eyepiece มุมเงย 45 องศาเพื่อให้การส่องทำได้สะดวกขึ้น โดยเฉพาะเมื่อต้องส่องวัตถุที่อยู่ภาคพื้นดิน เช่นส่องทิวทรรศน์ ส่องนก 
    • ให้ภาพที่ถูกต้อง ไม่กลับหัว ไม่สลับซ้าย-ขวา เหมาะใช้งานภาคพื้นดินตอนกลางวัน หรือภาคดาราศาสตร์เมื่อต้องการใช้ร่วมกับแผนที่ดาว
    • ใช้แก้ว prism ซึ่งไม่จำเป็นต้องมีการเคลือบสารสะท้อนเหมือนกระจก จึงใช้งานได้นานกว่า
    • Clear Aperture: 19.5mm
    • วัสดุภายนอกทำด้วยพลาสติก ABS และอลูมิเนียม
    • รองรับฟิลเตอร์ขนาด 1.25" มาตรฐาน
    • น้ำหนัก 108g (ไม่รวม packaging) มีฝาปิด 2 ด้านในกล่อง
    • ผลิตในไต้หวัน รับประกัน 1 ปี
    ฿1,290.00
  • iOptron 2kg CW for iEQ30, MT, ZEQ25/CEM25/CEM26 และ CEM40 ล๊อตต้นๆ

    iOptron 2kg CW for iEQ30, MT, ZEQ25/CEM25/CEM26 และ CEM40 ล๊อตต้นๆ

    This 2 kg (4.5lb) counterweight is designed for following iOptron mount: 

    • CEM40/CEM40EC* (early version with 20mm CW shaft)
    • iEQ30/iEQ30 Pro
    • CEM26
    • CEM25/CEM25P/CEM25EC
    • ZEQ25
    • AZ Mount Pro
    • MiniTower Pro
    • MiniTower II
    • MiniTower


    It can be used for other mount with a 20mm diameter counterweight shaft. 

    * Check your CEM40/CEM40EC mount CW shaft diameter before ordering.

    ฿1,690.00
  • ชุดอุปกรณ์ฉุกเฉิน Levenhuk LabZZ SK1 Survival Kit 70788

    ชุดอุปกรณ์ฉุกเฉิน Levenhuk LabZZ SK1 Survival Kit 70788

    ชุดอุปกรณ์ฉุกเฉิน Levenhuk LabZZ SK1 Survival Kit 70788

    • ชุด 6-in-1 Kit: (1) เข็มทิศ (2)ที่วัดอุณหภูมิ (3)เลนส์ขยาย (4)ไฟฉาย (5)นกหวีด (6)กระจก
    • เล็กกระทัดรัด และเต็มไปด้วยประโยชน์ใช้สอยในยามฉุกเฉิน  เหมาะกับการติดตัว ติดรถ หรือไปแค้มปิ้ง
    • ไฟฉายใช้ถ่าน CR2016 3V จำนวน 2 ก้อน จึงให้ความสว่างได้สูง ผู้ใช้สามารถเปลี่ยนเองได้ง่าย
    • Shipping weight: 0.1 lb (0.05 kg)
    • Package size (LxWxH): 3.9×1.4×1.4 in (10×3.5×3.5 cm)
    ฿198.40
    SALE
  • William Optics DSD 210 plate - Gold

    William Optics DSD 210 plate - Gold

    William Optics DSD 210 plate - Gold

    ฿1,790.00
  • Levenhuk TR100 Tripod

    Levenhuk TR100 Tripod

    Height: 38-115cm (15-45in). Load capacity: up to 5kg (11lbs)

    ฿1,352.00
    SALE
  • ฟอกัสเซอร์ GSO 2" M-LRN 10:1 Linear Bearing Crayford Focuser สำหรับกล้องสะท้อน (พร้อมฐานยึดความโค้งเหมาะกับกระบอกขนาด 230mm)

    ฟอกัสเซอร์ GSO 2" M-LRN 10:1 Linear Bearing Crayford Focuser สำหรับกล้องสะท้อน (พร้อมฐานยึดความโค้งเหมาะกับกระบอกขนาด 230mm)

    ฟอกัสเซอร์ GSO 2" M-LRN 10:1 Linear Bearing Crayford Focuser สำหรับกล้องสะท้อน (พร้อมฐานยึดความโค้งเหมาะกับกระบอกขนาด 230mm)

    The Crayford GSO eyepiece lift with linear bearings is a modern, technically advanced spectacle lift, which is a breakthrough among this type of device. The structure was designed based on two precision bearings moving on a steel rail, which improves the precision of adjustment and ensures increased load capacity (4.1 kg) compared to standard lifts. This allows stable attachment of even heavy astrophotography accessories.

    ฿6,990.00
  • GSO 1.25" Barrel/Nosepiece สำหรับสวมเข้ากับกล้องดูดาวขนาดฟอกัสเซอร์ 1.25"ทุกรุ่น

    GSO 1.25" Barrel/Nosepiece สำหรับสวมเข้ากับกล้องดูดาวขนาดฟอกัสเซอร์ 1.25"ทุกรุ่น

    GSO 1.25" Barrel/Nosepiece สำหรับสวมเข้ากับกล้องดูดาวขนาดฟอกัสเซอร์ 1.25"ทุกรุ่น

    • เป็นอะไหล่สำหรับ nosepiece ของเลนส์ตารุ่น GSO SuperView/Kellner/Plossl หรือ Barrel สำหรับตัวงอ (diagonal) ขนาด 1.25" ของ GSO
    • หลังแปลงแล้ว ใช้งานสวมได้กับกล้องดูดาวที่มีขนาด eyepiece holder/focuser 1.25" มาตรฐานทุกรุ่น
    • ด้านนึงเป็นเกลียว (ผู้) มาตรฐานสำหรับขันเข้ากับตัวงอ GSO diagonal body; อีกด้านนึงเป็น barrel ขนาด 1.25" มาตรฐาน ทำหน้าที่เป็น nosepiece สวมเข้ากับ eyepiece holder/focuser
    • มีเกลียว (เมีย) มาตรฐานรองรับฟิลเตอร์ขนาด 1.25" มาตรฐาน
    • วัสดุ: อลูมิเนียม ด้านในเป็นสีดำด้าน และเป็นร่องเพื่อลดแสงสะท้อนเพื่อให้ได้ภาพที่ contrast สูงสุด
    • ผลิตในประเทศไต้หวัน 
    ฿390.00
  • กระจกกล้องดูดาว GSO Elliptical Secondary Mirror 88mm AD037

    กระจกกล้องดูดาว GSO Elliptical Secondary Mirror 88mm AD037

    กระจกกล้องดูดาว GSO Elliptical Secondary Mirror 88mm AD037

    • กระจกรอง (secondary) แบบ elliptic คุณภาพสูงมากจาก GSO สำหรับเปลี่ยนกระจกเดิม หรือผู้ที่ต้องการประกอบกล้องดูดาวด้วยตนเอง (DIY)
    • มีขนาดตั้งแต่ 28mm ถึง 104mm (บางขนาดต้องสั่งเท่านั้น)
    • ทำจากแก้ว BK-7 เกรดสูง โดยมีคุณสมบัติการสะท้อนแสงที่ 92-93% ทั้งย่านความถี่แสงที่มองเห็นได้ พร้อมเคลือบด้วย SiO2 overcoating เพื่อป้องกันรอยขีดข่วนและคงคุณสมบัติการสะท้อนแสงได้นานนับสิบปี
    • GSO รับประกันคุณภาพของกระจกว่าอยู่ในระดับ diffrraction limited หรือดีกว่า ที่วัดได้จริงมักจะสูงกว่านั้นมาก - ความเรียบของกระจกที่ 1/16 wave RMS หรือสูงกว่า ซึ่งหมายความว่าแทบไม่มีการกระเจิงของแสงเลย
    • กรุณาดูสเปคด้านล่างสำหรับกระจกแต่ละขนาด กระจกหลัก (primary mirror) มีจำหน่ายโดย Thai Excite เช่นกัน
    ฿5,390.00

ขณะนี้ยังไม่มีผู้รีวิวสินค้ารายการนี้




ส่งให้เพื่อน

: *
: *
: *
พิมพ์ตัวอักษรที่เห็นในภาพ:


*
รหัสเป็น case-sensitive และจะต้องใส่ตรงตามที่กล่าวข้างต้น

รีวิว


คุณภาพสินค้าดีมาก​ ราคาไม่แพง​ ไม่ต้องเสียเวลารอนำเข้า+ภาษี
ทศพล
Nov 8, 2021

ผู้ผลิต