GSO 2" Self-Centering Extension Tube เพิ่มระยะลำกล้อง 80mm สำหรับกล้องดูดาวขนาดฟอกัสเซอร์ 2" ทุกรุ่น

GSO 2" Self-Centering  Extension Tube เพิ่มระยะลำกล้อง 80mm สำหรับกล้องดูดาวขนาดฟอกัสเซอร์ 2" ทุกรุ่น

แบ่งปันสิ้นค้าชิ้นนี้

รายละเอียด

คะแนนสินค้า
SKU
GSFF685
ผู้ผลิต
จำนวนในสต๊อก
เหลือ 2 ชิ้น
น้ำหนัก
200.00 g
ราคาของเรา
฿1,290.00

ตัวเลือก

จำนวน (เหลือ 2 ชิ้น)

(จาก 1 ถึง 2)


  • รายละเอียด

  • สินค้าแนะนำ

  • รีวิว

  • ความคิดเห็น

  • ส่งให้เพื่อน

GSO 2" Self-Centering Extension Tube เพิ่มระยะลำกล้อง 80mm สำหรับกล้องดูดาวขนาดฟอกัสเซอร์ 2"ทุกรุ่น

  • ใช้เพื่อช่วยให้สามารถฟอกัสภาพให้ชัดในกรณีที่ฟอกัสเซอร์ไม่สามารถขยับถอยไปมากเพียงพอที่จะได้ภาพที่ชัดได้ (อาจเกิดเมื่อพยายามฟอกัสวัตถุภาคพื้นดินที่อยู่ระยะใกล้ เป็นต้น)
  • สามารถใช้ส่องตรง (ไม่ต่อ diagonal) กับกล้องหักเห หรือใช้กับกล้องสะท้อนที่ออกแบบมาสำหรับถ่ายภาพ (ซึ่งปกติระนาบการฟอกัสสำหรับการส่องดูจะอยู่ไกลไปข้างหลังและไม่สามารถฟอกัสได้ถ้าไม่มี extension tube)
  • ใช้กลไก helical compression mechanism รุ่นใหม่เพื่อให้ eyepiece 1.25" อยู่กึ่งกลางของเส้นทางแสง (optical axis) ได้มากที่สุด เพื่อได้ภาพและสีที่แม่นยำที่สุด
  • ขนาด barrel 2 นิ้ว  สามารถใช้กับกล้องดูดาวหรือกล้องส่องทางไกลที่มีขนาดฟอกัสเซอร์ 2 นิ้ว
  • มี safety thumbscrew ที่ช่วยยึด eyepiece เพิ่มเติมไม่ให้หลุดออกจากกระบอกโดยไม่ตั้งใจ
  • ผลิตด้วยความแม่นยำจากอลูมิเนียมคุณภาพสูง ภายในมีการเคลือบสีดำด้านเพื่อลดแสงสะท้อนรบกวนจากภายนอก มีเกลียวสำหรับรองรับฟิลเตอร์ 2" มาตรฐาน
  • ผลิตในไต้หวัน ประกัน 1 ปี

 

GSO 2-inch Self-Centering extension tubes 80mm

 

The new twist-lock system allows locking 1.25" accessories dead-on to the optical axis, removing possibility of accessories being tilted or off-center, as well as problems of safety grooves being trapped in compression rings. By twisting the ring, an internal blackened compression ring closes in around the barrel of the eyepiece. It is then held gently but securely in the center. Pressure is not concentrated to one point but around the complete surface area of the eyepiece barrel. A safety thumbscrew is included to further secure the eyepiece if needed.

Different telescopes can have very different back focus distances. In most telescopes the focal plane is deliberately moved further out, allowing users to attach cameras and other accessories more easily. Refractors always have a rather long back focus since they are usually used with a star diagonal or erecting prism. As a result of this you often cannot directly focus the telescope if you do not use it with the above mentioned accessories. You would have to move the focuser further out, but you reach the end of the focus travel before reaching a focused image.

GSO 2-inch Self-Centering extension tubes 35mm 50mm 80mm

The Solution: GSO Optics self-centering extension tubes bridge the gap between the focuser and the focal plane. They are the ideal solution whenever the focus lies further outside than you can reach with the focuser. For telescopes that accept 2" accessories, GSO 2" self-centering extension tubes come in 3 lengths: 35mm, 50mm, 80mm. Choose the one with the back focus that you need.

The extension tubes are precisely machined from solid aluminium. They are black anodized. Interior of tube is baffled and blackeded to reduce reflections and glare. The 2" barrel has a safety undercut thumbscrew that adds additional protection to prevent eyepieces from dropping out of the tube. The barrel also has a 2" filter thread (M48x0.75) on the side of the telescope.

 

GSO 2-inch Self-Centering extension tubes showing compression ring and thumbscrew

 

GSO is a leader in optical telescopes and accessories and their products have been sold for years by the "Big Three" (Meade, Celestron and Orion) under their own brand names. GSO telescopes and accessories are also sold under different names world-wide; Zhumell (USA), Apertura (USA), TPO (USA), Teleskop Service (Germany), Sky Optic (France), Antares (Canada), Astronz (New Zealand), and more than a dozen more brands too many to name. GSO are known for their high consistency in quality control, low defects, and their Taiwanese-based manufacturing are close to match Japan in quality than other telescope manufacturers which are mostly manfactured in Mainland China. Give these telescopes a try - you will not be disappointed!

 

  • ตัวแปลง GSO 2" มีเกลียว T อยู่ด้านใน (สำหรับแปลง T-Adapter ของกล้องดูดาวให้กลายเป็น eyepiece holder ขนาด 2")

    ตัวแปลง GSO 2" มีเกลียว T อยู่ด้านใน (สำหรับแปลง T-Adapter ของกล้องดูดาวให้กลายเป็น eyepiece holder ขนาด 2")

    ตัวแปลง GSO 2" มีเกลียว T อยู่ด้านใน (สำหรับแปลง T-Adapter ของกล้องดูดาวให้กลายเป็น eyepiece holder ขนาด 2")

    • แปลง T-Adapter ของกล้องดูดาวให้กลายเป็น eyepiece holder ขนาด 2" เพื่อต่ออุปกรณ์เช่น eyepieces, diagonal ตามความเหมาะสม
    • ปลายที่ต่อกับกล้องมีเกลีบวที (T-thread) เพื่อต่อกับ T-Adapter
    • อีกปลายนึงเป็น eyepiece holder ขนาด 2" ที่มี compression ring แบบทิงเหลืองเพื่อป้องกันอุปกรณ์เป็นรอย
    • ผลิตจากอลูมิเนียมคุณภาพสูง แข็งแรงทนทาน
    • สินค้าคุณภาพสูง ผลิตในไต้หวัน
    ฿990.00
  • *ลดล้างสต๊อก* iOptron iEQ45 AZ Base

    *ลดล้างสต๊อก* iOptron iEQ45 AZ Base

    AZ base for converting iEQ45 from EQ to AZ. Requires pier or tripod (not included) 

    For a early version iEQ45 with 8406 hand controller, a hand controller and control boards upgrade are needed. Please contact iOptron directly for more information. Please also make a note when ordering if the mount is not an 8000D model. Some extra parts and DIY instruction will be supplied.

    ฿3,990.00
    SALE
  • iOptron Carry Bag for 2-inch Tripod

    iOptron Carry Bag for 2-inch Tripod

    Top loading carry bag. Perfect for carrying 2" tripod for CEM60/CEM60EC, iEQ45/iEQ45 Pro, iEQ30/iEQ30 Pro, MiniTower/MiniTower Pro* and CEM25/ZEQ25 mount. Will hold other tripods also (see dimensions). 

    Durable padded fabric with two adjustable shoulder straps and a waist buckle strap.

    Does not fit 2" MiniTower Pro tripod with triangle mounting plate.

    ฿1,890.00
  • เคสแข็งสำหรับ iOptron CEM40 Hard Case

    เคสแข็งสำหรับ iOptron CEM40 Hard Case

    Custom fitting hard case for CEM40

     

    ฿3,990.00
    SALE
  • Askar M54 M48 T-Ring for Nikon Z-Mount Mirrorless Cameras

    Askar M54 M48 T-Ring for Nikon Z-Mount Mirrorless Cameras

    Askar M54 M48 T-Ring for Nikon Z-Mount Mirrorless Cameras

    In astrophotography, Nikon, Canon, Sony mirrorless cameras have been used more and more frequently by astronomy amateurs in recent years. Therefore, on the basis of the DSLR camera adapters,Sharpstar have introduced camera adapters suitable for Nikon Z, Canon R and Sony E  mirrorless cameras.

    Out of the box, this adapter has an installed ring with an M48x0.75 female thread. This can be removed to expose an M54x0.75 female thread.

    ฿1,490.00
  • Sky-Watcher 8.4" Pier Extension for EQ6 / EQ6-R / AZ-EQ6

    Sky-Watcher 8.4" Pier Extension for EQ6 / EQ6-R / AZ-EQ6

    Sky-Watcher 8.4" Pier Extension for EQ6 / EQ6-R / AZ-EQ6

    Works on EQ6 and EQ6-R mounts. Raises the mount head 8.4”. Especially useful for owners of long-tube refractor telescopes because it positions the eyepiece at a more comfortable height and prevents the telescope from hitting a tripod leg. 

    ฿3,390.00
  • *PREORDER* ZWO FF80 APO 0.75× Full Frame Reducer

    *PREORDER* ZWO FF80 APO 0.75× Full Frame Reducer

    FF80APO 0.76X Full Frame Reducer

    ZWO has released a new 3-inch FF80APO 0.76X full frame reducer with a three-element optical design, including one element made of ED glass. Its reduction factor is 0.76x, which gives the FF80APO f/7.5 astrograph a shortened focal ratio of f/5.7 and a shorter focal length of 312mm. This allows for less total integration time and a wider field of view, bringing more convenience and possibilities for your wide-field deep sky imaging.

    The reducer has a rear interface that attaches to the FF80APO telescope tube’s included four-segment camera extension tube. The back focus is the standard 55mm, and it has a built-in M48X0.75 2-inch filter thread for easy attachment.

    ฿8,990.00
  • *ราคาช่วงแนะนำ* เมาท์ตามดาว Sky-Watcher Wave 150i Strainwave Mount ไม่รวมขาตั้ง

    *ราคาช่วงแนะนำ* เมาท์ตามดาว Sky-Watcher Wave 150i Strainwave Mount ไม่รวมขาตั้ง

    เมาท์ตามดาว Sky-Watcher Wave 150i Strainwave Mount

    • Wave 150i GoTo strainwave head
    • Works seamlessly with ASI Air (USB-B cable included)
    • EQ and AZ modes
    • Built-in cable management
    • Weighs 12.8 pounds (5.8kg)
    • 33-pound (15kg) payload capacity without optional counterweight
    • 55-pound (25kg) payload capacity with optional counterweight
    • Single D/V hybrid saddle
    • Latitude range from 0° to 90°
    • Red LED for latitude scale and bubble level
    • Wi-Fi and Bluetooth
    • RA power off braking function
    • RA and DEC home position functions
    • Requires 12V 2A power (not included)
    • Optional tripod, pier extension, and counterweight kit not included
    • Optical Tube not included
    ฿59,990.00
    SALE
  • Sky-Watcher Dovetail Mounting Plate, Long 33.5cm

    Sky-Watcher Dovetail Mounting Plate, Long 33.5cm

    Sky-Watcher Dovetail Mounting Plate, Long 33.5cm

    Compatible with most Sky-Watcher mounts and drilled to accept Sky-Watcher tube rings.

    Also suitable for Celestron, Vixen, Orion and other mounts with Vixen-type saddles. 

    ฿990.00
คะแนนเฉลี่ย:



1 รีวิวที่มีประโยชน์ที่สุด (ดูรีวิวทั้งหมด):
del russel
Jun 3, 2018
Excellent product, well made and is exactly as per description. Downside....having to pay extra for using a debit card...not good.
กำลังโหลด ...รีวิวข้างบนมีประโยชน์กับคุณหรือไม่? ใช่ (0) / ไม่ (0)

ส่งให้เพื่อน

: *
: *
: *
พิมพ์ตัวอักษรที่เห็นในภาพ:


*
รหัสเป็น case-sensitive และจะต้องใส่ตรงตามที่กล่าวข้างต้น

ผู้ผลิต