Antlia OIII 4.5nm EDGE 2"

Antlia OIII 4.5nm EDGE 2"

แบ่งปันสิ้นค้าชิ้นนี้

รายละเอียด

คะแนนสินค้า
SKU
AN-OIII45NM200E
ผู้ผลิต
จำนวนในสต๊อก
เหลือ 1 ชิ้น
น้ำหนัก
50.00 g
ราคาของเรา
฿9,990.00

ตัวเลือก

จำนวน (เหลือ 1 ชิ้น)

(จาก 1 ถึง 1)


  • รายละเอียด

  • สินค้าแนะนำ

  • รีวิว

  • ความคิดเห็น

  • ส่งให้เพื่อน

Product Details

Application and Performance:

  • High transmittance and narrow bandwidth to maximize contrast
  • Steep spectral profile minimizes halos around bright stars
  • A single substrate to eliminate internal reflections
  • Narrowband Objects: OIII Emission Nebulae, Planetary, Wolf-Rayet Nebulae and Supernova Remnants
  • Use in light polluted areas and dark sites
  • Extend imaging time when the moon is up
  • Antlia narrowband EDGE filters can be used down to f/3 systems with minimal loss of signal
  • Edge blackened to eliminate internal reflections from stray light
  • Superior optical reliability reduces post image processing
  • This filter is only effective for deep sky objects that contain OIII emissions

 

Antlia 2‘’ OIII 4.5nm EDGE

 

The Antlia OIII EDGE narrowband filter optimizes the FWHM (full width half maximum) to 4.5nm bandpass. The suppression of optical density (OD) 5 on unwanted wavelengths and the excellent transmittance characteristics found in the Antlia 3nm Pro series has been incorporated into the 4.5nm EDGE narrowband filters. The result is that these filters deliver superior SNR (signal to noise ratio) and better contrast in your images.

Antlia OIII 4.5nm EDGE filters are designed to deliver 85% transmission at the 500.7nm line that provides you with the maximum signal to reveal the faintest OIII nebulae
structures.

 

Antlia OIII 4.5nm EDGE curve

 

Conventional broader narrowband filters cause a heavy loss in transmission due to the strong Center Wavelength (CWL)-shift. Antlia guarantees T>90% within 1nm range of the center bandwidth, which means that the OIII 4.5nm EDGE narrowband filters can guarantee high transmittance for working with both long focal ratios and fast optical systems. Blue-shift data shows that Antlia 4.5nm EDGE filters can be used with nearly all systems as fast as f/3 with minimal loss in emission signal and meets the requirements of fast optics.

When Antlia designs filters for astronomy imaging systems, they look at how they will work together with optical systems, carefully designing the out of band blocking rate, transmittance and band-pass parameters to achieve an optimum result. Each filter is individually tested and scanned by strict QC methods to ensure that the quality meets the high-performance parameters. The result is that Antlia is known for designing filters for astrophotography that achieve exceptional quality and performance parameters at affordable prices. We believe the price to performance ratio compares more favorably than similar premium filters in the market.

 

Technical Data:

  • Schott optical substrate
  • 2" mounted (2mm thickness +/-0.05mm). Additional sizes available separately
  • Surface Quality: 60/40 (Refer to MIL-O-13830)
  • 2 sides fine-optically polished to ensure accurate 1/4 or better wavefront
  • Parallelism: less than 30 arcsec
  • Center-Wavelength of Antlia OIII 4.5nm filter: 500.7nm
  • Peak transmission > 85%
  • Blocking: > 5 OD (0.001%) @ 300-1000nm
  • 2 sides Multi-layers anti-reflection coating
  • Single / Non-glued substrate

Warranty:

  • 3 years against delamination

Filter Ring:

  • 2" Mounted (M48x0.75 thread)
  • Ultra-thin filter cell to minimize vignetting by maximizing possible clear aperture
  • Black Anodized Finish
  • Laser Engraving, No Fading

Not Recommended:

  • Solar Observing and imaging
  • Visual observation
  • DO NOT LOOK AT THE SUN WITH ANTLIA FILTERS. Serious eye damage will result if you fail to observe the warning.
  • GSO 2" Spacer Extension Ring ขยายระยะออกไป 30mm สำหรับอุปกรณ์กล้องดูดาวขนาด 2"

    GSO 2" Spacer Extension Ring ขยายระยะออกไป 30mm สำหรับอุปกรณ์กล้องดูดาวขนาด 2"

    GSO 2" Spacer Extension Ring ขยายระยะออกไป 30mm สำหรับอุปกรณ์กล้องดูดาวขนาด 2"

    • ใช้เพื่อช่วยให้สามารถฟอกัสภาพให้ชัดในกรณีที่ฟอกัสเซอร์ไม่สามารถขยับถอยไปมากเพียงพอที่จะได้ภาพที่ชัดได้ (อาจเกิดเมื่อพยายามฟอกัสวัตถุภาคพื้นดินที่อยู่ระยะใกล้ เป็นต้น)
    • สามารถใช้ส่องตรง (ไม่ต่อ diagonal) กับกล้องหักเห หรือใช้กับกล้องสะท้อนที่ออกแบบมาสำหรับถ่ายภาพ (ซึ่งปกติระนาบการฟอกัสสำหรับการส่องดูจะอยู่ไกลไปข้างหลังและไม่สามารถฟอกัสได้ถ้าไม่มี extension tube/ring)
    • เส้นผ่าศูนย์กลาง 2 นิ้ว สามารถใช้กับอุปกรณ์กล้องดูดาว 2" อย่างเช่น eyepiece, barlow lens, diagonal เป็นต้น
    • ผลิตจากอลูมิเนียมคุณภาพสูง มีเกลียวสำหรับรองรับฟิลเตอร์ 2" มาตรฐาน จึงยังสามารถใช้ฟิลเตอร์ได้ถึงแม้จะสวม spacer extension ring ในตำแหน่งของฟิลเตอร์แล้ว
    • รุ่น 30mm: ความยาวรวม = 33mm, ให้ระยะที่เพิ่มขึ้น 30mm หลังติดตั้ง
    • ผลิตในไต้หวัน ประกัน 1 ปี
    ฿390.00
  • ฟิลเตอร์ส่องดวงอาทิตย์ Thousand Oaks ID 10.75" (273mm) Solarlite  #S-10750

    ฟิลเตอร์ส่องดวงอาทิตย์ Thousand Oaks ID 10.75" (273mm) Solarlite #S-10750

    ฟิลเตอร์ส่องดวงอาทิตย์ Thousand Oaks ID 10.75" (273mm) แบบ Solarlite #S-10750

    • ใหม่! รุ่น Solarite คงคุณภาพของภาพของรุ่นกระจก + จุดแข็งที่เหนียวและเบาของ polymer เข้าด้วยกัน จึงมีความคงทนมากที่สุดรุ่นนึงในตลาด
    • วัสดุฉีกขาดยาก ทนต่อการเป็นรูหรือรอยขูดขีด น้ำหนักเบา ไม่ต้อง rebalance กล้องหลังสวมใส่
    • คงสีเหลืองส้มของดวงอาทิตย์ตลอดทั้งพื้นที่
    • สวมเข้ากับขอบของหน้ากล้องอย่างแน่นพอดี (เสริมด้วย felt lining ที่รวมอยู่ในชุด) เพื่อป้องกันการหลุดของฟิล์เตอร์ กรองแสงดวงอาทิตย์ที่จะเข้าสู่หน้ากล้องได้ 99.999%
    • ขอบนอกทำด้วยอลูมิเนียมที่เบาทนทานและแข็งแรง ขอบในเสริมวัสดุที่ช่วยให้การสวมใส่แน่นกระชับ (friction fit) เพื่อเพิ่มผิวสัมผัสกับขอบกล้องดูดาว ป้องกันอุบัติเหตุที่อาจทำให้ฟิลเตอร์หลุดโดยง่าย
    • ส่งผ่านแสงเพียง 1/1000 ของ 1% (Optical Density 5) เหมาะสำหรับใช้สังเกตด้วยตาและการถ่ายภาพ
    • ขนาดขอบใน = 10.75" (ใช้ได้กับกล้องที่มีขอบนอกระหว่าง 10.50" ถึง 10.75" โดยใช้ felt lining เสริมขอบในของฟิลเตอร์ 3-6 ตำแหน่ง)
    • ถ้าใช้งานอย่างระมัดระวัง ฟิลเตอร์ Thousand Oaks Optical รุ่นนี้สามารถอยู่ได้ไม่ต่ำกว่า 20 ปี และอาจนานชั่วชีวิตคน
    • สินค้าแบรนเนมคุณภาพจาก USA; รับประกัน 2 ปี
    ฿4,690.00
  • แว่นขยาย Levenhuk Zeno 50 LED Magnifier, 2.2/4.4x, 88/21 mm

    แว่นขยาย Levenhuk Zeno 50 LED Magnifier, 2.2/4.4x, 88/21 mm

    LED illumination. Magnification: 2.2/4.4x. Diameter: 88/21 mm

    ฿392.00
    SALE
  • Optolong UV / IR Cut Filter - 36mm Unmounted

    Optolong UV / IR Cut Filter - 36mm Unmounted

    Optolong UV / IR Cut Filter - 36mm Unmounted

    ฿1,890.00
  • William Optics 1.25 inch Erecting Prism สำหรับ eyepieces ขนาด 1.25", มุมเงย 45 องศา

    William Optics 1.25 inch Erecting Prism สำหรับ eyepieces ขนาด 1.25", มุมเงย 45 องศา

    William Optics 1.25 inch 45 Deg. Erecting Prism

    William Optics new 45 Deg. EP will work with any 1.25" eyepieces and scopes with 1.25" eyepiece holders. It will turn upside down images right side-up and give correct left-to-right image. This high-quality, low-cost erecting prism will set the standard in erecting prisms!

    ฿3,390.00
  • ท่อขยายระยะ SVBONY Variable Extension Tube ยืดหดได้ระหว่าง 24มม-35มม  เกลียว M48

    ท่อขยายระยะ SVBONY Variable Extension Tube ยืดหดได้ระหว่าง 24มม-35มม เกลียว M48

    ท่อขยายระยะ SVBONY Variable Extension Tube ยืดหดได้ระหว่าง 24มม-35มม  เกลียว M48

    • ใช้เพื่อช่วยให้สามารถฟอกัสภาพให้ชัดในกรณีที่ฟอกัสเซอร์ไม่สามารถขยับถอยไปมากเพียงพอที่จะได้ภาพที่ชัดได้ (อาจเกิดเมื่อพยายามฟอกัสวัตถุภาคพื้นดินที่อยู่ระยะใกล้ เป็นต้น)
    • สามารถใช้ส่องตรง (ไม่ต่อ diagonal) กับกล้องหักเห หรือใช้กับกล้องสะท้อนที่ออกแบบมาสำหรับถ่ายภาพ (ซึ่งปกติระนาบการฟอกัสสำหรับการส่องดูจะอยู่ไกลไปข้างหลังและไม่สามารถฟอกัสได้ถ้าไม่มี extension tube)
    • ขนาดเกลียว M48 สามารถใช้กับอุปกรณ์เช่น T-ring หรือข้อต่ออื่นๆที่ขนาดเกลียวเท่ากัน
    • ยืดหดได้ระหว่าง 24มม ถึง 35มม
    • ผลิตจากอลูมิเนียม แข็งแรงทนทาน
    ฿690.00
  • ตัวแปลง SVBONY 0.965" to 1.25" Adapter (สำหรับใช้อุปกรณ์ขนาด 1.25" ใน Diagonal/ฟอกัสเซอร์ ขนาด 0.965")

    ตัวแปลง SVBONY 0.965" to 1.25" Adapter (สำหรับใช้อุปกรณ์ขนาด 1.25" ใน Diagonal/ฟอกัสเซอร์ ขนาด 0.965")

    ตัวแปลง SVBONY 0.965" to 1.25" Adapter (สำหรับใช้อุปกรณ์ขนาด 1.25" ใน Diagonal/ฟอกัสเซอร์ ขนาด 0.965")

    • สำหรับใช้อุปกรณ์ขนาด 1.25" ใน Eyepiece holder / Diagonal / ฟอกัสเซอร์ ขนาด 0.965"
    • ผลิตจากอลูมิเนียมคุณภาพสูง
    • มี compression ring สำหรับยึด eyepiece ได้แน่นขึ้นและป้องกัน eyepiece เป็นรอย
    ฿390.00
  • Sharpstar 3" Quadruplet 0.85x Reducer / Coma Corrector for f/3-f/6 Newtonian Reflectors

    Sharpstar 3" Quadruplet 0.85x Reducer / Coma Corrector for f/3-f/6 Newtonian Reflectors

    Sharpstar 3" Quadruplet 0.85x Reducer / Coma Corrector for f/3-f/6 Newtonian Reflectors 

    Sharpstar 30085NTRD coma corrector can shorten the original focal ratio of f/4 to f/3.4, greatly shortening the exposure time. Besides, the Sharpstar 30085NTRD coma corrector is considerately designed with many threads. At the front of the corrector, there is M82×1 male thread for the connection to our 3" focuser. At the back of the corrector, there is tapped with M76×1 male thread, M68×1 female thread and M54×0.75 female thread, which can be used to thread on our M54 to M48 camera adapter ring. The back-focus is standard 55mm, starting from the M54 thread(camera end) to focal plane.

    ฿23,990.00
  • ZWO USB3.0 Data Cable

    ZWO USB3.0 Data Cable

    The ZWO USB3.0 data cable has been upgraded to a round design, providing enhanced flexibility and stability while minimizing interference. It is compatible with USB 3.0 cameras and numerous other compatible devices, ensuring seamless connectivity.

    Cable Length: 2 meters

    USB Connector Type: Type-B 3.0(male) to Type A(male)

    ฿690.00

ขณะนี้ยังไม่มีผู้รีวิวสินค้ารายการนี้




ส่งให้เพื่อน

: *
: *
: *
พิมพ์ตัวอักษรที่เห็นในภาพ:


*
รหัสเป็น case-sensitive และจะต้องใส่ตรงตามที่กล่าวข้างต้น

ผู้ผลิต