ขาตั้ง (Tripod legs) / Tri-Piers / Mini Piers

Set of 3 Vibration Suppression Pads. For use with iOptron tripods or other tripods.

Dimension Φ2.5" X 1"

The new 8-inch tall CEM26/GEM28 mini pier

Die-cast and machined metal. Perfect for adding distance between scope and tripod on iOptron CEM26/GEM28 mounts.

1.25" Stainless Steel tripod that fits the iOptron SkyGuider Pro, iPANO, SkyTracker/SkyTracker Pro, SmartEQ /Pro and SmartStar/Cube mount.

With these adapters, you can install your mount onto the sturdy yet portable iOptron Tri-pier.

• Tri-pier Adapter for Takahashi (EM-200), SkyWatcher (HEQ5/EQ6/NEQ6/AZEQ6), Celestron (CGEM/CGEM-DX), Orion Atlas (EQ-G/AZEQ-G) (#8036-TK)

Note: Due to the payload limitation of the Tri-Pier, this adapter/Tri-pier combination is not designed for CEM120 with heavier payload. Use at your own risk. This adapter can be modified to mount a CEM120 onto your own pier.

iOptron® MiniPier is designed for iOptron GOTO mounts to provide 8" extra telescope height. The MiniPier fits on various iOptron tripods/piers, as well other brand tripod with some DIY.

ขาตั้ง iOptron Carbon Fiber Tripod 40mm Ver.A สำหรับ HEM15/27/44, HAZ31/46, CEM26/40, GEM28/45, SkyHunter, SkyGuider Pro, iEQ30/iEQ30 Pro

The iOptron carbon fiber tripod provide a lightweight yet strong support for iOptron mounts. It fits these iOptron mounts (may need extra mounting accessories):

• HEM15/HEM27/HEM44
• HAE29/HAE43
• HAZ31/HAZ46 (ESPECIALLY w/ #8042 pier)
• CEM40
• GEM45(may limit low latitude application)
• CEM26
• GEM28
• SkyHunter
• SkyGuider Pro
• iEQ30/iEQ30 Pro (may limit low latitude application)
• Camera with 3/8 mounting hole
• Other equipment with 3/8 mounting hole

Collapsed Length: 597 mm (23.5")

The iOptron Tri-Pier combines the strength and stableness of a pier with the levelling flexibility of a tripod. Aluminum pier and leg tops. Stainless steel leg extensions. The Tri-Pier feet has built-in vibration suspension pads.